BMQRQ - EM8116, MIL T6096A
- MSDS: BMQRQ
- Manufacturer: N P
- Product Name: EM8116, MIL T6096A
- National Stock Number: 8010-00-165-1591
Product Identification
Contractor
Telephone: 818-240-2060/800-228-5635
Cage: 92108
Ingredients
ETHYL ACETATE 85%
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 40.00%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NORMAL BUTYL ACETATE
CAS: 123-86-4
RTECS: AF7350000
Fraction By Weight: 15.00%
OSHA PEL 150 PPM/200 PPM STEL
ACGIH TLV: 150 PPM/200 PPM STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
DIACETONE ALCOHOL-DAA
CAS: 123-42-2
RTECS: SA9100000
Fraction By Weight: 10.00%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
METHYL ETHYL KETONE (SARA 313)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 35.00%
OSHA PEL 200 PPM/300 PPM STEL
ACGIH TLV: 200 PPM/300 PPM STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Health Hazards Acute and Chronic:SKIN & EYES: CONTACT IRRITATION.
INHALATION: MAY CAUSE NAUSEA, HEADACHE, DIZZINESS AND IRRITATION OF
THE RESPIRATORY TRACT.
First Aid
First Aid:EYES: FLUSH WITH WATER. CONTACT A PHYSICIAN. SKIN: WASH WITH
SOAP AND WATER. INHALATION: PROVIDE FRESH AIR. OXYGEN OR ARTIFICIAL
RESPIRATION AS NEEDED.
Fire Fighting
Flash Point:24.0F,-4.4C; TCC
Accidental Release
Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. PERMIT ONLY
PROPERLY PROTECTED WORKERS IN THE AREA (I.E. WITH EYE/SKIN
PROTECTION AND SELF-CONTAINED BREATHING GEAR. ABSORB SMALL SPILLS
WITH INERT ABSORBENT. PUMP L ARGE SPILLS INTO SALVAGE TANK.
Handling
Handling and Storage Precautions:STORE DRUMS, WELL SEALED, IN A COOL,
DRY, WELL VENTILATED AREA AWAY FROM ALL IGNITION SOURCES. GROUND
CONTAINERS WHEN TRANSFERRING MATERIAL.
Other Precautions:EMPTY CONTAINERS ARE HAZARDOUS. OBSERVE ALL LABEL
PRECAUTIONS.
Exposure Controls
Respiratory Protection:ABOVE PEL/TLV, USE NIOSH/MSHA APPROVED
RESPIRATOR FOR ORGANIC VAPORS.
Ventilation:LOCAL EXHAUST (TO A FIRE-SAFE AREA) RECOMMENDED.
Protective Gloves:RESISTANT PLASTIC OR RUBBER.
Eye Protection:CHEMICAL SPLASH GOGGLES.
Other Protective Equipment:AS NEEDED TO ELIMINATE SKIN CONTACT. EYEWASH
STATIONS AND SAFETY SHOWERS SHOULD BE IN WORK AREA.
Supplemental Safety and Health
Stability
Hazardous Decomposition Products:CO AND CO2 UPON INCOMPLETE COMBUSTION.
Disposal
Product ID:EM8116, MIL T6096A
MSDS Date:01/01/1987
FSC:8010
NIIN:00-165-1591
MSDS Number: BMQRQ
Waste Disposal Methods:CONTACT FEDERAL, STATE AND LOCAL AGENCIES TO
ENSURE COMPLIANCE OF DISPOSAL METHOD WITH CURRENT REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.